Ultrasonic Cleaners for the Manufacturing Industry
Zenith Mfg & Chem Corp. 85 Oak St., Norwood, NJ 07648-0412 800-432-SONIC (7664) Fax: 201-768-6999
|
Ultrasonic Cleaners for the Manufacturing Industry Zenith Mfg & Chem Corp. 85 Oak St., Norwood, NJ 07648-0412 800-432-SONIC (7664) Fax: 201-768-6999
|
|
|
Ultrasonic cleaners are perfectly suited to this type of cleaning application, since they have the capability to clean where cleaning is virtually impossible by other mechanical means. The ultrasonic energy will penetrate deep into the item to clean the jets of a carburetor, the inside of a cylinder head to remove the carbon residues which are usually impossible to reach, and the greases and oils from the assembly components, such as nuts & bolts, which makes reassembly a much easier task. These systems can remove thick carbon deposits in minutes, down to the bare metal. The ACS-30 includes features not found on competitive automotive cleaning systems such as the Grease Monkey (TM), such as our patented CROSSFIRE Multiple Frequency Ultrasonic System which provides the power necessary to remove heavy carbon and rust deposits, while simultaneously providing penetration to clean the smallest blind holes and screws. Heaters are sized for fast heat-up of cleaning fluids to allow you to get to work faster. All stainless steel exterior system panels will last forever, and on-board filtration systems will ensure that your cleaning fluids last as long as possible before requiring replacement. The ATS-30 has been designed to provide many years of care-free operation. For more information on the ACS-30 ultrasonic cleaner for automotive parts, contact Zenith Manufacturing at your convenience. Contact InformationAlthough this web site has been designed to provide you with a wealth of information, contact our sales department for additional information which may not be provided herein. Our sales engineers will answer all of your questions, without obligation of any kind, and will prove that our equipment can clean your parts to expected levels BEFORE a dollar is spent. There is so much involved in the ultrasonic cleaning process that even the most educated engineers may need direct assistance in determining which system design would be best for their parts washing application. And, no web site can possibly address all of the possibilities. Which frequency of ultrasonics would be best? How about filtration? How much ultrasonic power will be required? What cleaning fluids will work best? Side mounted ultrasonics, or bottom mounted? Our engineers will be able to provide you with the answers to all of these questions for you, and will recommend the perfect degreaser for your application.
|
|
Send mail to
webmaster@zenith-ultrasonics.com with
questions or comments about this web site.
|
The
ACS-30 Ultrasonic Cleaner for Automotive and Aviation Parts represents the most
technologically advanced system available for cleaning of automotive and
aviation parts, such as carburetors, cylinder heads, engine blocks, pistons,
screws, nuts & bolts, and others. Simply place the parts to be cleaned
into the ultrasonic cleaning bath, set the included digital timer, and press the
START button. The ATS-30 will gently remove burned on carbon residues,
greases, oils, rust, and virtually any other contaminant on the item, while
employees can work on other tasks. Once the cleaning cycle is complete,
parts are removed for immediate reassembly. Nothing could be easier