Ultrasonic Cleaners for the Manufacturing Industry
Zenith Mfg & Chem Corp. 85 Oak St., Norwood, NJ 07648-0412 800-432-SONIC (7664) Fax: 201-768-6999
|
Ultrasonic Cleaners for the Manufacturing Industry Zenith Mfg & Chem Corp. 85 Oak St., Norwood, NJ 07648-0412 800-432-SONIC (7664) Fax: 201-768-6999
|
|
|
Multi-tank Cleaners provide Multiple Processing Stages, Cleaning, Rinsing, Drying, and Others
Zenith Multi-tank Cleaners include the following system varieties:
2-tank Systems: Provide Cleaning and Rinsing only. 5-tank Systems: Provide Cleaning, Rinsing, and Drying, with Best Possible Performance To process parts in a multi-tank system, baskets are manually or
automatically transferred from tank to tank to complete the process required.
Parts are first lowered into the cleaning tank. When cleaning
is complete, the basket is transferred to the rinse tanks to remove the
detergent residues used in the cleaning tank. Transfer to the
drying tank will follow to dry the rinsewater from the parts. Any
combination of processes may be included. Zenith's AUTOMATION SYSTEMS can be purchased to fully automate the basket transfer process. This is a VERY cost effective option at Zenith Ultrasonics. In fact, automation from Zenith will cost less than a factory employee annual salary. A host of other options are also available, such as Deionized Water Conservation Systems, Deionization Systems, Filtration Systems, Automatic Fill and Drain Systems, CROSSFIRE Multiple Frequency Ultrasonics, and any other option you may think of.
STANDARD MULTI-TANK CLEANING SYSTEMS All Zenith multi-tank ultrasonic cleaners are available in the following standard sizes: 1000 Series: 12" x 16" x 12" tall Any other size can be custom-fabricated. MTC-2: This 2-tank multi-tank ultrasonic cleaner design includes a single ultrasonic cleaning tank, and a single rinse tank. MTC-4: The most common clean/rinse/dry system design. These 4-tank systems include a single ultrasonic cleaning tank, dual rinse tanks equipped with Cascade Overflow capabilities, and a single drying tank. Fresh water or deionized water is added to the final rinse tank, which overflows into the first rinse tank so that both tanks share the same water supply. This system is capable of producing zero-residue cleaning results if used with deionized water (deionization systems are available as optional equipment). MTC-5: The MTC-5 series is used when customers require a double drying tank for increased processing speed, rust preventative dip added to a 4-tank process, or triple cascade rinse tanks for the best possible final quality. By adding a 2nd drying tank, parts can typically be processed twice as fast, since drying times usually represent the longest part of the overall process. A rust preventative dip will coat parts with a rust preventative fluid which will leave no residues on parts. Or, the 3-tank rinse design can ensure that your cleanroom-grade results are easily obtained. A host of other OPTIONAL EQUIPMENT can be added to the multi-tank cleaner to enhance its operation. Options such as rinse tank ultrasonics, filtration, heat, timers, double dryer tank options to speed up the process, air knife blow off systems, intermittent parts oscillation, and many others are available to enhance the performance of the ultrasonic cleaning system. If your process requires more than just an ultrasonic cleaning tank, contact Zenith immediately for assistance in selecting the multi-tank cleaner best suited for your needs. Key Features
|
|
Send mail to
webmaster@zenith-ultrasonics.com with
questions or comments about this web site.
|
Engineers
who require more than just the cleaning process will most likely require a
Multi-tank Ultrasonic Cleaner. Multi-tank cleaners include an ultrasonic
cleaning tank, followed by any number of additional tanks to accomplish any
process required. 
