The MTC-2 is a 2-tank ultrasonic cleaning and rinsing machine designed for cellular manufacturing operations where lower volumes of parts are cleaned and rinsed manually by operators.  A compressed-air Drying Wand is also included to permit operators to dry parts after the rinsing process is complete.

The MTC-2, like all Zenith cleaning machines, is manufactured using the highest grade of materials available, and includes features such as Particulate Filtration, stainless steel access panels, and Digital Cycle Timers to increase the longevity of the cleaning agent and system, while simultaneously providing convenient operation.  Controls are enclosed in a NEMA4X fiberglass electrical enclosure rather than a steel enclosure to eliminate the possibility of corrosion.  Systems also include drain and fill ports with ball valves to provide for easy liquid maintenance operations.

Ultrasonic cleaning is performed in the first stainless steel tank.  Ultrasonic options include a choice of operating frequencies, or our patented CROSSFIRE Multiple Frequency Ultrasonic System for the best possible cleaning effect for most applications.  The ultrasonic cleaning tank is heated using a high-efficiency heater with a Digital Temperature Controller which continuously displays bath temperature.  A Particulate Filtration System is also included to remove particles and contaminants from the cleaning tank, thereby increasing its expected life.  Filter housings are mounted in a convenient location for servicing.  The included Digital Ultrasonic Timer automatically deactivates the ultrasonic cleaning cycle when complete.

Submersion Rinsing is performed in the 2nd stainless steel tank.  Since only 1 rinse tank is included, this system is designed for lower-volume applications where zero-residue cleaning results are not required, and detergent transfer from cleaning tank to the rinsing tank is minimal.  An Overflow Port and Fill Port with ball valve control are included on the rinse tank to provide the ability to add water to the rinse tank when water quality is un-acceptable. 

If operators utilize the Compressed Air Wand for drying of the parts, water residues will be minimized or eliminated since the water is removed from the part completely.  If zero-residue cleaning results are required, the MTC-3, MTC-4, or MTC-5 cleaning systems may be a better choice.

System Design Features:

• Ultrasonic Cleaning, Rinsing, and Compressed Air Drying in a Single Cleaning System.
• Most parts are Internally Mounted for Cleaner Exterior Appearance.
• All Components are Easily Accessed for Maintenance Operations.
• Available with CROSSFIRE Multiple Frequency Ultrasonic Systems.
• NEMA4X Fiberglass Control Enclosure Provides Ease of Operation while Eliminating Potential Corrosion.
• Stainless Steel Construction.
• 38" Working Height.
• Filtration System and Digital Ultrasonic Timer Included as Standard Equipment.

Optional Equipment:

• Pump Drain Systems to pump liquids to overhead waste or other location.
• Intermittent Oscillation Systems to oscillate parts during cleaning and/or rinsing cycles.
• Rinse Water Quality Monitoring System.
• High-volume Filtration System.
• Ultrasonic Rinse Systems.
• Oil Skimmers.
• Stainless Steel Frame.
• Spray Rinse Wand.

Available Standard Systems:

MTC2-2000

• Basket Size:  20” x 12” x 14” maximum height
• Fluid Operating Temperatures:  50-175 degrees F.
• Filter System Flow Rate:  Up to 20GPM
• Filter Cartridge Size:  20”, 10 micron
• Ultrasonic Power:  1200 watts
• Input Power:  208/220 VAC, 60hz
• External Dimensions:  80" x 24" x 38" tall

MTC2-2400

• Basket Size:  24” x 18” x 15” maximum height
• Fluid Operating Temperatures:  50-175 degrees F.
• Filter System Flow Rate:  Up to 20GPM
• Filter Cartridge Size:  Dual 20”, 50 and 10 micron
• Ultrasonic Power:  2400 watts
• Input Power:  208/220 VAC, 60hz
• External Dimensions:  88" x 30" x 38" tall

MTC2-3600

• Basket Size:  36” x 24” x 18” maximum height
• Fluid Operating Temperatures:  50-175 degrees F.
• Filter System Flow Rate:  Up to 20GPM
• Filter Cartridge Size:  Dual 20”, 50 and 10 micron
• Ultrasonic Power:  3600 watts
• Input Power:  208/220 VAC, 60hz
• External Dimensions:  118" x 36" x 38" tall

All other sizes are custom-manufactured.

For additional information, click here.

Zenith Mfg. & Chemical Corp.
85 Oak St.
Norwood, NJ  07648-0412
800-432-SONIC (7664)
FAX: 201-768-6999
sales@zenith-ultrasonics.com